SETTING UP PLAY BACK FUNCTIONS
ADVANCED
MIC / UP button
When the LCD monitor is turned on, pressing the UP ( ) button will either cause the
cursor to move up or change a selected sub menu.
When the LCD monitor is not turned on, pressing the UP ( ) button will allow a sound
recording to be added to a stored still image.
1. Turn the camera on.
2. Rotate the mode dial to PLAY mode.
3. Press the LEFT (
) / RIGHT ( ) buttons to select the
image that you wish to add sound to.
4. Press MIC ( ) button and the sound recording
indicator will display. The sound is being recorded.
5. Recording can be stopped by pressing the MIC ( )
button again. The sound will record for 10 seconds.
[ Being recorded ]
PLAY & PAUSE / DOWN button
When the LCD monitor is turned on, pressing the DOWN ( ) button will move the cursor
down or change the sub menu.
When the LCD monitor is not turned on, the DOWN ( ) button is used as the PLAY &
PAUSE ( ) button.
The PLAY & PAUSE ( ) button is used for playing and pausing a sound recorded still
image, movie clip or slide show.
1. Turn the camera power on.
2. Rotate the mode dial to PLAY mode.
3. Press the LEFT ( ) / RIGHT ( ) buttons to select a sound recorded still image or a
movie clip. Or, select slide show.
4. Press PLAY & PAUSE ( ) button.
10SEC
2002/ 01/ 01 00 : 00
REC
To Next Page
Loading...
