31
RECORDING
MACRO( ) button
Used for macro shots
- Wide : 6cm~ 80cm Tele: 40cm ~ 80cm
In dark conditions, the auto focus may not function. If this
occurs, press the MACRO button and you can select fixed focus
manually.
Selecting the focus mode
Pressing the Macro button will change the focus mode as shown below.
Fixed focus(Infinity) Autofocus(default)
Macro
Fixed focus(2M)
Fixed focus(1M)
Pressing the macro
button
for over 1second
Pressing the
macro button
Pressing the
macro button
Pressing the
macro button
Pressing the
macro button
Pressing the
macro button for
over 1second
NOTICE
The changed focus mode is maintained until
the camera power is turned off.
When the macro mode is selected, it is
possible that camera shake will occur. If this
is the case, use a tripod to eliminate this.
When the macro mode is selected, it is
recommended that you use the LCD
monitor to compose these shots.
To Next Page
Loading...
