Samsung Digimax 420 - Imprinting Date and Time on Images

73
SETUP
Imprint
There is an option to include DATE/TIME on still images.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3]
menu will display.
2. Select the [SETUP 2/3] menu by pressing the RIGHT button.
3. Select the [IMPRINT] menu by pressing the UP/DOWN
button.
4. Press the RIGHT button and the cursor will shift to the
[IMPRINT] sub menu
5. Select the desired sub menu by pressing the UP/DOWN
button.
OFF : DATE & TIME will not be imprinted on the
image file.
DATE : Only DATE will be imprinted on the image
file.
DATE&TIME : DATE & TIME will be imprinted on the
image file.
6. Press the OK button to confirm the setting.
INFORMATION
Date & Time are displayed at the bottom right side of the LCD monitor.
Date will be imprinted as DATE TYPE setting.
TIME is imprinted in the following way : [Hour / Minute/ Second] and hours are shown using
the 24 hour clock.
The imprint function is unaffected by the camera being switched on and off.
Date & Time is imprinted as you set it in the DATE SETUP menu.
The imprint function is applied only to a still image.
BACK: SET:OK
SETUP 2/3
IMPRINT
OFF
DATE
DATE & TIME
CHANGE :
SETUP 2/3
DATE SETUP 03/04/01
IMPRINT OFF
DATE TYPE Y/M/D
USER SET NO