Samsung Digimax 420 - Installing Camera Application Software

94
Setting up the application software
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
To use this camera with a PC, install the application software first. After this has been done, the stored
images in the camera can be moved to the PC and can be edited by an image editing program.
1. Click the [Install] menu in the Autorun frame.
The camera driver is installed automatically.
3. The [Digimax Viewer 2.0] installation window will be displayed as
shown below. Click the [Next>] button.
2. Installation is complete.
A window for which you can select application software will be
displayed. Select the application program and click the [Install]
button. Refer to page.92 for more information about the
application program.
[Click !]
[Click !]
[Click !]
NOTICE
Disable other programs before installing the application software.
Before installing the application software, disconnect the USB connection.
INFORMATION
If you select [Exit] at step 2, the application program installation will be cancelled.