72
Date setup
You can change the imprinted date.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3]
menu will display.
2. Select the [SETUP 2/3] menu by pressing the RIGHT button.
3. Select the [DATE SETUP] menu by pressing the UP/DOWN
button.
4. Press the RIGHT button and the cursor will shift to the [DATE
SETUP] sub menu.
5. Select the desired sub menu by pressing the UP/ DOWN/
LEFT/ RIGHT button.
LEFT / RIGHT button : selects YEAR/ MONTH/ DAY
/HOUR / MINUTE
UP/ DOWN button : changes the value of each item.
6. Press the OK button to confirm the setting.
The selection range for date/time setup covers from
2003~2049.
(It is automatically programmed to allow for a leap year/
month)
INFORMATION
If the batteries or AC adapter are removed, it is necessary to reset the time /date.
Recording date displays on the LCD monitor in the PLAY mode.(DATE IMPRINT : ON)
CHANGE :
SETUP 2/3
DATE SETUP 03/01/01
IMPRINT OFF
DATE TYPE Y/M/D
USER SET NO
BACK: SET:OK
SETUP 2/3
DATE SETUP
00:00
2003/01/01
To Next Page
Loading...
