64
DPOF : Standard
1. Rotate the mode dial to the PLAY mode and press the
MENU button.
2. Select the [PLAY[DPOF] 2/2] menu by pressing the RIGHT
button.
3. Select the [STANDARD] menu by pressing the UP/DOWN
button.
4. Press the RIGHT button and the cursor will shift to the
[STANDARD] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN
button and press the OK button.
[ONE IMAGE] : Specifies the number of copies for a
selected image
[ALL IMAGES]: Specifies the number of copies for all
images.
6. Select the print quantity by pressing the UP/DOWN button
and press the OK button.
Print quantity : 0 ~ 30
7. If you select the [ONE PICTURE] sub menu at step 5, you
can embed a print quantity on another image by pressing the
LEFT / RIGHT button.
8. If an image carries DPOF instructions, the DPOF indicator
( ) will show. The number of prints are displayed alongside
the DPOF indicator.
EXIT:MENU CHANGE:
PLAY[DPOF] 2/2
STANDARD OFF
INDEX
BACK: SET:OK
PLAY[DPOF] 2/2
STANDARD
ONE IMAGE
ALL IMAGES
MOVE IMAGE :
EXIT : MENU SET : OK
#OFPRINTS
OFF
To Next Page
Loading...
