ŝ14Ş
Names of Working Parts
ƈ The following indicators appear on the LCD monitor depending
on the status of the camera.
ƈ Guides appear on the LCD monitor for 3 seconds when powered on or setting dial mode.
1. Flash mode (Active mode appears) (p.47)
2. Drive mode (p.100)
3. AE metering (p.129)
4. AF mode (p.119)
5. Switch focus point (p.120)
6. White balance (p.110)
7. Sensitivity (p.113)
8. Shooting mode (Mode dial position) (p.102)
9. World time warning display (p.159)
10. Date and time (p.158)
* Indicators 3,4,5,6 and 7 only appear when the setting
other than the default setting is selected. 9 only appears
when World Time is On ( ).
LCD monitor
While Power is On or Operating Mode Dial
ƃ Select [Off] for [Guide display] in [ Set-up] to not show indicators. (p.162)
INFORMATION
LCD Monitor Indications
To Next Page
Loading...
