ŝ173Ş
Setting up the application software
2. After restarting the computer, connect the PC to the camera with the USB cable.
3. Turn the camera power on.
The [Found New Hardware Wizard] will open and the
computer will recognize the camera.
ſ If your OS is Windows XP, an image viewer program will
open.
If the download window of Digmax Master opens after
starting Digimax Master, the camera driver was setup
successfully.
Ү In this mode, you can download stored images to your PC through the USB cable.
Ү The LCD monitor is always turned off in PC mode.
ƈ Connecting the camera to a PC
1. Press the MENU button and select the [ Set-up] menu.
2. Set [Transfer Mode] on camera to [PC].
3. Connect the PC to the camera with the USB cable.
Starting PC mode
To Next Page
Loading...
