ŝ42Ş
Basic Shooting Operation
3. Turn the zoom ring to select the size of the subject.
- Using the Zoom Lens (p.46)
5. Press the shutter release button fully.
The picture is taken.
4. Position the subject inside the autofocus frame and press the
shutter release button halfway.
The autofocus system operates.
The focus indicator appears in the viewfinder when the
subject is in focus.
The flash pops up automatically when necessary (manually
lift the flash when Flash mode is not set to [Auto]).
- Operating the shutter release button (p.43)
- Hard-to-Autofocus Subjects (p.44)
- Using the Built-in Flash (p.47)
Focus indicator
To Next Page
Loading...
