Samsung DV300 - Page 19

Disassembly and reassembly
3-6 Copyright© 1995-2012 SAMSUNG. All rights reserved.
(c) Remove the BARREL_MAIN PCB ASSY.
Fig 3-11
5. Disassembly of BARREL ASSY and MAIN PCB ASSY.
Fig 3-10
CONNECTOR
FPCB
FPCB
1. Open.
2. Remove
.
Remove the FPCB from the connector.
Fig. B
(a) Remove the WI-FI antenna as indicated " Fig. A" below.
(b) Remove the two CONNECTORs as indicated " Fig. B" below.
BARREL_MAIN PCB ASSY
Fig. A