Why is 5.1 channel sound not working on my Samsung DVD-P390 DVD Player?
5.1 channel sound is only reproduced when the DVD player is connected to the proper Amplifier and the disc is recorded with 5.1 channel sound. Ensure the disc has the “5.1 ch” mark. Also, check if your audio system is correctly connected and working. Finally, verify that the Audio Output in the SETUP Menu is set to Bitstream.
What to do if I forgot the password on my Samsung DVD-P390 DVD Player?
To reset a forgotten password on your Samsung DVD Player, press and hold the button on the front panel for more than 5 seconds with no disc inside. This will revert all settings, including the password, to factory defaults. Use this method only when absolutely necessary.
General| Brand | Samsung |
|---|---|
| Model | DVD-P390 |
| Category | DVD Player |
| Language | English |
Warnings about laser exposure, opening the unit, and self-repair.
Identification and function of buttons and indicators on the player's front panel.
Description of audio, video, component, and digital audio output jacks on the rear panel.
Identification and function of all buttons on the remote control for operating the player.
Steps for inserting, playing, pausing, stopping, and removing discs.
To Next Page