How to fix a Samsung DVD-P750 DVD Player remote control that's not working?
If your Samsung DVD Player remote control isn't working, try these steps: First, check and replace the batteries. Then, make sure you're within 20 feet of the DVD player. If it still doesn't work, remove the batteries, press and hold any button(s) for several minutes to reset the remote's microprocessor, then reinstall the batteries and try again.
What to do if my Samsung DVD-P750 disc does not play?
If your Samsung DVD Player isn't playing the disc, ensure that the disc is installed with the label side facing up and check the region number of the DVD.
What to do if my Samsung DVD-P750 DVD Player remote control is not working?
If your Samsung DVD Player's remote control isn't working, first check and replace the batteries. Ensure you're within 20 feet of the DVD player. If it still fails, remove the batteries, press and hold any button(s) for several minutes to reset the remote's microprocessor, then reinstall the batteries and try again.
Why is my Samsung DVD-P750 not producing 5.1 channel sound?
5.1 channel sound is only reproduced if: the DVD player is connected to the proper amplifier and the disc is recorded with 5.1 channel sound. Therefore, ensure the DVD has the “5.1 ch” mark, your audio system is properly connected and functioning, and the Audio Output in the SETUP Menu is set to Bitstream.
Why is there no audio coming from my Samsung DVD Player?
If you're not getting any audio from your Samsung DVD Player, make sure you have selected the correct Digital Output in the Audio Options Menu.
Why is 5.1 channel sound not working on my Samsung DVD Player?
5.1 channel sound is only available if: the DVD player is connected to the correct amplifier, the disc is recorded with 5.1 channel sound, your audio system is connected and functioning correctly, and the Audio Output in the SETUP Menu is set to Bitstream. Check that the disc has the “5.1 ch” mark. Verify your audio system connections and settings.
Why is there no audio from my Samsung DVD-P750?
If there is no audio from your Samsung DVD Player, ensure that you have selected the correct Digital Output in the Audio Options Menu.
How to fix a noisy or distorted picture on a Samsung DVD-P750?
If the picture on your Samsung DVD Player is noisy or distorted, make sure that the disc is not dirty or scratched. Clean the disc to resolve the issue.
What to do if I forgot the password for my Samsung DVD-P750?
If you forgot the password for your Samsung DVD Player, press the button for more than 5 seconds with no disc inside. Note that all settings, including the password, will revert to the factory settings. Use this solution only when absolutely necessary.
How to unblock the screen on a Samsung DVD Player?
To unblock the screen on your Samsung DVD Player, press the button for more than 5 seconds with no disc inside. This will revert all settings to the factory defaults.
General| Type | DVD Player |
|---|---|
| Audio Formats Supported | Dolby Digital, DTS |
| Progressive Scan | Yes |
| Upscaling | No |
| Disc Formats | CD, CD-R/RW, DVD |
| Video Output | Composite, Component, S-Video |
| Audio Output | Stereo RCA |
| Output Resolution | 480p |
| Playback Formats | MP3, JPEG |
To Next Page
