Samsung DVM PLUS III HR - Page 563

V-31
C
ONTROL
S
YSTEMS
No. Name Description
External control display Display when ERV is controlled synchronously with DVM indoor unit.
Test display Indicates that an error occurs in ERVs.
Centralized controller display
Indicates that the remote controller prohibition option is set. (Only upper controller, such
as the Centralized controller, can control indoor unit)
Time / Error display
1)When synchronously controlled with system air conditioner : Displays operation delay time.
2)When not synchronously with the system air conditioner : Displays scheduled operation time.
3)When an error occurs : Displays error code.
Display fan speed Indicates the Fan speed. (Low ➞ High ➞ Turbo)
Filter replacement alarm icon Indicates if the filter replacement time is reached.
2 remote control display Indicates if two remote controllers are used for one ERV.
Display when external device is
in use (Option).
Indicates if the optional items are in use, such as heater, damper and humidifier.
Ventilation mode display
Display the ventilation mode setting.
Heat exchange mode : / Auto ventilation mode : /
Normal ventilation mode :
CO
2
Sensor level display (Option) Displays CO
2
concentration levels.
Air purification mode icon Indicates that air purification mode has been selected.
Sleep mode icon Indicates that Sleep mode has been selected.
Operation On/Off button Press this button to turn on all connected ERVs. Press once again to turn off all connected ERVs.
Operation mode selection button Press this button to select ERV operation mode. Each press of the button changes operation modes.
Confirm/Cancel button
If not controlled synchronously with DVM indoor unit: complete or cancel the Operation timer
setting. If controlled synchronously with DVM indoor unit: complete or cancel synchronization
time delay setting.
Timer or synchronization
If ERV is on : Select minutes to turn off ERV , If ERV is off: select minutes to turn off ERV
time delay selection button
Fan speed button Press this button to change the fan speed in the following order (Medium ➞ High ➞ Turbo).
Filter replacement alarm reset button Press this button to clear the filter replacement alarm and reset the filter time.
8
10
9
12
7
14
15
16
11
13
4
5
18
17
3
2
6
1
2
3
4
5
6
7
8
10
11
9
(3) Description of buttons and functions
1
12
13
14
15
16
17
18
05-1_control systems(002~045) 3/15/08 4:09 Page 31