Samsung DVM S AM240HXVAGH User Manual

DVM S
AM✴✴✴FXVAGR Series
AM✴✴✴FXVAGH Series
AM✴✴✴HXVAGH Series
AM✴✴✴MXV✴NR Series
Air Conditioner
installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
DB68-03850A-14

Samsung DVM S AM240HXVAGH Specifications

General

Brand	Samsung
Model	DVM S AM240HXVAGH
Category	Air Conditioner
Language	English

Summary

Safety Precautions

Caution Signs

Lists warnings and precautions for installation and operation.

Selecting Installation Location

Caution When Installing in Seashore

Base Construction and Outdoor Unit Installation

Base Ground Construction

Refrigerant Pipe Installation

Refrigerant Pipe Work

Guidelines for piping length, height difference, and material selection.

Refrigerant Pipe Welding and Safety

Cutting or Flaring Pipes

Allowable Pipe Length and Examples

Specifies maximum lengths and provides examples for refrigerant pipe configurations.

Electrical Wiring Work

Specification of Circuit Breaker and Power Cable

Table listing required circuit breakers and power cable specifications for models.

Power and Communication Cable Configuration

Grounding Work

Grounding the Power Cable

Table and guidelines for grounding power cables based on installation conditions.

Air Tightness Test and Vacuum Drying

Air Tightness Test

Procedure for testing the refrigerant system for leaks using nitrogen gas.

Vacuum Drying Pipes and Indoor Units

Steps for removing moisture and air from the refrigerant system using a vacuum pump.

Charging Refrigerant (for Turkish Market Only)

Important Information Regulation Regarding Refrigerant Used

Setting Outdoor Unit Option Switch and Key Function

Setting Outdoor Unit Option Switches : A TYPE

Setting the Option

Setting the MCU and Pipe Addresses (for HR Only)

Setting the MCU Address and MCU Ports to Use

Guide to setting MCU addresses and selecting ports for indoor unit connection.

Setting the Pipe Addresses Manually

Instructions for manually setting addresses for MCU ports and indoor units.

Setting the Pipe Addresses Automatically (Auto Pipe Pairing Operation)

Process for automatically setting pipe addresses and checking connections.

Things to Check After Completing Installation

Installation Work Checks

Checklist for verifying outdoor and indoor unit installation integrity.

Refrigerant Pipe Work Checks

Checklist for verifying refrigerant pipe selection, connection, and insulation.

Electrical Wiring Work Checks

Inspection and Test Operation

Precautions Before Test Operation

Checklist Before Auto Trial Operation

Auto Trial Operation

Automatic Refrigerant Amount Detection Function