ENGLISH-14
Accessories
Accessories
You must keep following accessories until the installation is nished.
Hand over the installation manual to the customer after nishing the installation.
Name Installation manual Installation check card Packing socket
Quantity
1 1 1
Image
Models with packing socket : AM080,100,120MXWA, AM300KXWA
Socket can be dierent depending on the model (Page 20, 23)
Optional accessories
Following optional accessories are needed for connecting pipes between the indoor and outdoor units.
Classication Model Name Specication
Y-Joint
MXJ-YA1509M 15.0kW and below
MXJ-YA2512M Over 15.0kW~40.0kW and below
MXJ-YA2812M Over 40.0kW~45.0kW and below
MXJ-YA2815M Over 45.0kW~70.3kW and below
MXJ-YA3419M Over 70.3kW~98.4kW and below
MXJ-YA4119M Over 98.4kW~135.2kW and below
MXJ-YA4422M Over 135.2kW
Y-Joint (Only H/R)
MXJ-YA1500M 22.4kW and below
MXJ-YA2500M Over 22.4kW~70.3kW and below
MXJ-YA3100M Over 70.3kW~135.2kW and below
MXJ-YA3800M 135.2kW and below
Distribution header
MXJ-HA2512M 45.0kW and below (for 4 rooms)
MXJ-HA3115M 70.3kW and below (for 8 rooms)
MXJ-HA3819M Over 70.3kW (for 8 rooms)
Y-Joint
- Outdoor unit
MXJ-TA3419M 134.4kW and below
MXJ-TA4122M 140.0kW and Over
Y-Joint (Only H/R)
- Outdoor unit
MXJ-TA3100M 134.4kW and below
MXJ-TA3800M 140.0kW and Over
If you use an indoor unit with no internal EEV(Electric Expansion Valve), you will need an EEV kit.
Only use the genuine accessories listed in above table and do not use imitated accessories.
Recommended specication of the strainer
Work pressure
Water pipe connection
Mesh size Material(strainer/Mesh)
AM080/100/120/200 AM300
1.96 MPa
PT 1-1/4
(Internal thread)
PT 2
(Internal thread)
50 Mesh AISI316/SUS304