ENGLISH-18
Drain pipe installation
Cautions regarding connecting the anchor bolt
Use the rubber washer to prevent the anchor bolt from corroding.
Rubber washer
Anchor bolt specications
Size
Diameter of
the bore (a)
Anchor length
(b)
Sleeve length
(C)
Insertion
depth
Fastening
torque
a
b
c
M10
M10 14 mm 75 mm 40 mm 50 mm 30 N·m
Use anchor bolts and nuts made of plated zinc or STS material. Regular anchor
bolts or nuts may get damaged by corrosion.
Cautions regarding anti-vibration frame installation
During installation, make sure there is no gap between the base ground and the supporting structures such as
anti-vibration frame or H beam.
Base ground must be constructed rmly to support the bottom part of the anti-vibration mount.
After installing the anti-vibration frame, unscrew the xing part on the top and bottom part of the frame.
If the anti-vibration frame or H beam is xed to the base ground with anchor bolts, make sure that
waterproofed surface is not damaged by anchor bolts and apply additional waterproof solution if necessary.
CAUTION
To Next Page
Loading...
