Samsung Flip WM65B


Printing
To print, you must set up the Print Server and the Clock Set.
To set up the Print Server, the product and the printer you want and your PC must be
connected to the same network.
Flip Printing Software must be also installed on the PC connected.
" Connecting to a network”.
" You can set up the Print Server at MenuSETTINGSConnectAdvanced Settings
Print Server.
" You can set Clock Set at MenuSETTINGSSystemTimeClock Set.
" The Flip Printing Software is available on the website
- http://displaysolutions.samsung.com
- http://www.samsung.com
" PDF, XPS, One note
machines, are not supported, but only printers that can print actual paper are supported.
" 
Installing Flip Printing Software
Follow the onscreen instructions to install Flip Printing Software.
" 
PC environment.
PC installation requirements
• 

" When installing the software, make sure that critical Windows updates are already
installed. Update Windows to the latest version before beginning the setup.
" For Windows 7, make sure that Service Pack 1 is already installed.
Setting up the printer
Flip Printing Software is installed, make the following settings on the product
onscreen menu.
Setting up automatically
1
Select MenuSETTINGSConnectAdvanced Settings menu.
2
Select Print ServerConnect to ServerAuto.
Setting up manually
1
Select MenuSETTINGSConnectAdvanced Settings menu.
2
Select Print ServerConnect to ServerManual, and then enter the Server IP address
and the Server Port number of the PC where Flip Printing Software is installed.