Network settings (Wireless)
Connecting to a wireless network
Wireless IP sharer
the video may not play smoothly.
" Select a channel for the wireless IP sharer that is not currently being used. If the channel
set for the wireless IP sharer is currently being used by another device nearby, this will
result in interference and communication failure.
" Your product supports only the following wireless network security protocols.
"
"
Use WPS
"
Automatic network setup (Wireless)
Most wireless networks have an optional security system that requires devices that access
wireless network, you will have to enter the Pass Phrase during the automatic or manual
setup process.
How to set up automatically
1
Set Network Type to Wireless from the Open Network Settings page.
2
The product searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, select a network.
" If the desired wireless router does not appear, select Refresh to search again.
" If the router cannot be found after retrying, select Add Network.
4
Go.
" You may skip this step if you selected an open network.
5
6
OK button appears on the bottom of the
screen.
7
Tap OK.
Manual network setup (Wireless)
If this is the case, ask the network administrator for the IP address, subnet mask, gateway
and DNS server address. Enter these values manually.
Getting the network connection values
To view the network connection values on most Windows computers, follow these steps.
To Next Page
Loading...
