22
Set the network connection to use Internet services such as perform software upgrades.
Automatic Open Network Settings (Wired)
How to set up automatically
1
Set Network Type to Wired from the Open Network Settings page.
2
3
OK button appears on the bottom of the
screen.
4
Tap OK.
"
"
Manual Open Network Settings
(Wired)”.
Manual Open Network Settings (Wired)
If this is the case, ask the network administrator for the IP address, subnet mask, gateway
and DNS server address. Enter these values manually.
Getting the network connection values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
Status.
3
On the dialog that appears, click the Support tab.
4
On the Support tab, click the Details button. The Network connection values are
displayed.
How to set up manually
1
Set Network Type to Wired from the Open Network Settings page.
2
3
Select Cancel while network connections are being attempted. This will stop the
connection.
4
Select IP Settings on network connection screen. The IP Settings screen appears.
5
IP setting to Enter manually.
" Setting IP setting to Enter manually automatically changes DNS setting to Enter
manually.
6
Enter the IP Address, Subnet mask, Gateway, and DNS Server values manually.
7
When done, select OK at the bottom of the page. The network test screen appears and
8
OK button appears on the bottom of the
screen.
9
Tap OK to complete the setting.
To Next Page
Loading...
