123
Data communication
From the Home screen, → "Settings" → "Connections" →
"Bluetooth"
Tap of a device you want to cancel pairing → "Unpair"
• Set the Bluetooth function to ON beforehand to be detectable.
You can send contacts (contact data in vcf format) or les such as still
images or videos, etc., to a device (PC, etc.) compatible with Bluetooth.
• For sending, perform the operation from the menu such as "Share",
"Send", etc., of each app.
If "File transfer" screen appears, tap "Accept"
• appears on the status bar and data reception starts.
• Reception status can be checked by the Notication panel.
• After completion of the reception, display Notication panel and tap
"File received" to display the list of received data. Tap data you want
to view/play, you can check received data.
NFC is an abbreviation of Near Field Communication that is an
international standard proximity wireless communication method
specied by ISO (International Organization for Standardization). By
using reader/writer function (R/W), put the terminal close to NFC
tag to receive data, etc.
• For holding over the other device, see "Notes on holding over the device"
(P.87).
To read/write NFC tags, turn NFC/Osaifu-Keitai settings to ON.
From the Home screen, → "Settings" → "Connections" →
"NFC/Osaifu-Keitai settings"
Information
• If you set NFC/Osaifu-Keitai lock ON/OFF, transmitting/receiving of
NFC tags while the screen is locked is disabled.
• Actual communications are not guaranteed for all devices equipped
with Reader/Writer function.
To Next Page
Loading...
