Samsung Galaxy A22 5G - Security codes used on the terminal

30
Getting started



Press [Side key] for 2 seconds or longer
• The starting screen appears, and then the lock screen appears.
• When you turn the power on for the rst time, make the initial settings
following to the onscreen instructions (P.31).

Swipe the screen


Press [Side key] for 1 second or longer

"Power o󱐯" → "Power o󱐯"
• The terminal vibrates and power turns o󱐯.

You can set the screen lock to prevent the erroneous operation of the
touch screen or keys.
• When the display is turned o󱐯 with "Screen timeout" (P.103) set, the
screen lock activates automatically after a while the screen disappears.


Press [Side key]
• The display turns o󱐯 and the screen lock is set.


Press [Side key] during the screen lock
• Lock screen appears.

Swipe the screen

a
b
d
Lock screen (example)
c
e
a
Clock widget
b
Dial activating button
c
Edge panel handle
• Swipe to the center of screen, edge panel is displayed (P.50).
d
Machi-chara (e.g. my daiz)
• Notify you of information such as mail reception or incoming call.
e
Camera activating button
Information
• When notication information for missed calls or others arrives during
the screen lock, the notication information may be displayed on the
lock screen.
• You can change the unlock method of the screen lock (P.106).