Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when there is a Wi-Fi access point
available but you are not connected to it. May also
display if there is a communication issue with the
target Wireless Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to “Wi-Fi
Direct” on page 151.
Wi-Fi Advanced Settings
The Advanced Wi-Fi menu allows you to set up many of your
device’s Wi-Fi service, including:
•
Network notification when an open network is available
•
Setting your Wi-Fi sleep policy
•
Checking for Wi-Fi Internet service
•
Viewing your device’s MAC and IP Address
To access the Advanced Wi-Fi menu:
1. From the Home screen, ta
p
➔
Settings
➔
Wi-Fi
.
2. Press ➔
Advanced
.
For more information, refer to “Advanced Wi-Fi Settings” on
page 107.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note:
See your service plan for applicable charges for Wi-Fi
Direct.
1. From the Home screen, tap
➔
Settings
➔
Wi-Fi
.
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi ON .
ON
3. At the bottom of the Wi-Fi screen, tap the
Wi-Fi Direct
button.
4. Repeat
steps 1 - 3
on the other device you want to
connect with. The steps on a different model of phone,
may be different.
5. On your phone, tap
Scan
if the phone doesn’t
automatically start to scan.
151
To Next Page
Loading...
