31
DEVICE FUNCTIONS
DEVICE FUNCTIONS
30
CALLING FEATURES
Making a Call
1. From the Home screen, tap (Phone).
2. Enter the number you wish to call (using the
keypad) and tap (Send) to place a
call.
If you make a mistake while dialing, tap to
clear the last digit. Touch and hold to clear
the entire sequence.
NOTE: When you activate the Auto redial option in the Call settings
menu, the device automatically redials up to 10 times when
the person does not answer the call or is already on the
device, provided your call is not sent to voicemail.
Ending a Call
X From within an active call, tap (End
Call).
Answering a Call
X Touch and slide (Answer) to the right
to answer an incoming call.
Reject a Call
X Touch and slide (Reject) to the left.
This action routes the incoming call to your
voicemail system.
Reject a Call with a Message
1. At the incoming call screen, touch and drag
the Reject call with message tab upward.
2. Tap a predefined rejection message or
tap Create new message to create a new
custom outgoing response.
Using the Speakerphone
X During an active call, tap
Speaker
(Speakerphone) to switch between the
earpiece and the speakerphone.
Call Waiting
Call Waiting notifies you of incoming calls during a
call. You have the option of answering or ignoring a
new incoming call.
1. Make your initial call.
2. Touch and slide (Answer) to the right
to answer the new incoming call.
3. Tap an option from the on-screen menu:
● Putting xxx on hold to place the initial
caller on hold while you answer the new
incoming call.
● Ending call with xxx to end the initial call
and answer the new call.
NOTE: The new caller appears at the top of the list. The previous
caller is placed on hold and appears at the bottom of the list.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
