- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
[ Note ]
Using OCTA disassembly upper is mandatory to prevent window crack,
except for using the automatic OCTA disassembler.
Disassembly - Back Glass (3/8)
3) Fix the device on the OCTA disassembly holder.
4) Align 2 absorbers(OCTA disassembly upper)along with the back glass edge.
※ Left side of the back glass must be detached firstly.
Please keep the direction of device on the disassembly holder.
To Next Page
Loading...
