- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
Assembly - Battery (1/2)
1) Attach a new battery adhesive tape on the bracket from bottom to top(①).
2) Press the outside of tape with finger or disassembly stick (②).,
and remove the film (③).
3) Attach the battery from bottom to top (④).
4) Push enough the outside of battery with thumbs after attaching battery(⑤).
①
⑤
Bottom
Top
④
Bottom
Top
② ③
[ Note ]
The battery tape will be changed to other types.
The HQ will announce about that via the GSPN.
To Next Page
Loading...
