- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
2) Assemble ear jack.
3) Tighten 6 screws on the ear jack and sub PBA.
Assembly - Ear Jack and Sub PBA (2/2)
- Assemble ear jack hole part fist(④),
and make a connection firmly.
④
- Torque force : 1.3 kgf·㎠ ± 7% (1.22~1.38)
Screw specification: 2.5mm, Silver
※ Do not confuse the screw holes for rear cases on the SUB-PBA.
To Next Page
Loading...
