- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
Disassembly - Battery (1/5)
1) Put ethyl alcohol into the out side of battery with clean swab(①),
and slightly tilt the front case to soak alcohol inside enough.
2) Lift battery using battery disassembly vacuum.
3) Remove all residues of tape (the battery tapes CAN NOT be re-used).
[ Notice ]
1. Do NOT use any sharp tools(disassembly stick, knife, any plastic or tweezers).
2. Do NOT reuse the battery and battery tapes.
3. In case of battery replacement, transfer the IMEI label on the old battery to the new battery.
If the battery is not properly removed, it may lead to damage to the phone and battery.
Only authorized service providers with the instructions provided can remove the battery.
Core process
for battery handling
① ② ③
To Next Page
Loading...
