Samsung Galaxy S8 - Disassembly - Parts on the Bracket

- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
Disassembly - Parts on the Bracket
1) Remove Front cam / IRIS cam module & sensor FPCB & motor
using top-rounded tweezer.
Sensor FPCB
Motor
Sensor FPCB : Gently insert top-round
tweezers to the left hole for disassembly and
lift it up softly.
Front cam / Iris cam module :
Gently insert the tweezers to the hole
for disassembly and lift the module slightly.
If the adhesive tapes are damaged, change
the tape to the new one.
Front CAM/IRIS CAM
Motor: Gently insert top-round tweezers
to the hole for disassembly and lift it up softly.