- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
Disassembly - Back Glass (2/8)
2) Input the device into the hot plate or mobile dryer.
Condition of pre-heat the device
- Case1 (with battery; SOC 68%↓) : 70℃/10~20min(Hot plate and Mobile dryer)
- Case2 (with battery; SOC 68%↑) : 60℃/10~20min(Hot plate and Mobile dryer)
※ Pre-heat under 60℃ for 10~20min in case cannot check SOC, such as No power or no display.
※ Keep the pre-heating condition to prevent quality issue during repair.
To Next Page
Loading...
