Samsung Galaxy S8 - Secure and Activate Your Device

- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
Disassembly - Back Glass (6/8)
7) Lift up and release absorbers after detaching one side of back glass.
8) Take the device out and detach the back glass safely from left to right side.
9) During the lifting, release the finger print sensor connector from the PBA
using the disassembly stick.
10) Check if the finger print sensor is damaged or not during detaching back glass.
11) Remove all tapes and residues on the back glass with tape residue.
☞ Back glass tapes CAN NOT be re-used.
Core process
for water resistance