- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
Disassembly - Front Ass'y
1) When display part has a problem, Front Ass'y needs to be replaced.
- To replace Front Ass'y, all parts on the main PBA and sensor FPCB and front camera and
motor need to be disassembled, however there is no need to be changed to the new one.
- Ensure that battery & receiver can NOT be re-used, after detaching it from the bracket.
- It doesn’t need to detach the receiver to replace Front ass’y, but it needs to detach the
battery for the return-logistic reason.
To Next Page
Loading...
