- This document cannot be used without Samsung’s Authorization -
Confidential
Rev1.0
- Softly remove the protection film of finger print sensor tape on the back glass.
Assembly - Back Glass (4/4)
4) Assemble the back glass.
- Softly remove the protection film of outside and inner tapes on the rear cases.
- Hold a device with one hand, and put the back glass with another hand from top to bottom.
(Fingers holding the device can easily help to align the back glass.)
[ Notice ]
Align left and right side of Back glass precisely during attaching with fingers.
Core process
for water resistance
- Press the outside of back glass with thumbs enough.
Top
Bottom
To Next Page
Loading...
