www.jouleuk.co.uk | www.joule.ie
6
MUST BE COMPLETED AND
THEN REGISTERED ONLINE
TO COMPLETE WARRANTY
Is the unit installed the correct distance from nearest boundaries?
Is the unit secured correctly to antivibration mounts via rubber mounts?
Is the unit mounted plumb level?
Is condensate drain kit tted? (drain kit located inside HP access door)
If unit is mounted on wall brackets, is drip tray installed?
Heating Controls
Heat Pump
Installation Checklist
Please register your product online
Is correct size pipe work used?
Are exible antivibration hoses tted and washers used?
Are heat pump isolation valves tted out at the heatpump?
Is Y-Strainer tted on the return pipework to heat pump and tted in the correct orientation?
Is ow and return pipe work connected the right way around?
Is Primary ow and return pipework insulated?
Heat Pump Plumbing (Outdoor)
Is the ow switch installed on the primary pipework and tted in the correct orientation? (Smart
Plumb Compact not applicable)
Is the ow switch installed on the primary horizontal pipework with 150mm pipe work each side
free of a bend or appliance? (Smart Plumb Compact not applicable)
Is Flow and Return pipe work connected the right way around?
Is the heating expansion vessel correctly sized, secured and charged to correct pressure? (Smart
Plumb Compact not applicable)
Is the Potable expansion vessel secured and charged to the correct pressure?
Are all pump valves and isolating valves fully open?
Has system been completely ushed of air and charged to the correct operating pressure of 2 bar?
Are all safety valves and tundish drained through a metal pipe to an appropriate drain point?
Cylinder Plumbing (Indoor)
To Next Page
Loading...
