Samsung GT-S5830M - Adjust the Brightness of the Display

Getting started
28
Set an unlock pattern
In Idle mode, open the application list and select
1
Settings
→
Location and security
→
Set screen lock
→
Pattern.
See the on-screen instructions and example patterns
2
and select Next.
Draw a pattern by dragging your finger to connect at
3
least 4 dots and select Continue.
Draw the pattern again and select
4
Confirm.
Set an unlock PIN code
In Idle mode, open the application list and select
1
Settings
→
Location and security
→
Set screen lock
→
PIN.
Enter a new PIN (numeric) and select
2
Continue.
Enter the PIN again and select
3
OK.
›
Adjust the brightness of the display
In Idle mode, open the application list and select
1
Settings
→
Display
→
Brightness.
Drag the slider to adjust the level of brightness.
2
Select
3
OK.
The brightness level of the display will affect how
quickly the device consumes battery power.
›
Set a screen lock
You can lock the touch screen by activating the screen lock
feature. Your device will require the unlock code each time
your turn on the device or unlock the touch screen.
If you forget your unlock code, bring your device •
to a Samsung Service Center to reset it.
Samsung is not responsible for any loss of security
•
codes or private information or other damages
caused by illegal software.