Connectivity
83
›
Activate the Wi-Fi feature
In Idle mode, open the application list and select Settings
→
Wireless and networks
→
Wi-Fi settings
→
Wi-Fi.
The Wi-Fi feature running in the background will
consume battery power. To preserve battery power,
activate the feature only when needed.
›
Find and connect to a Wi-Fi AP
In Idle mode, open the application list and select
1
Settings
→
Wireless and networks
→
Wi-Fi settings.
The device will automatically search for available Wi-Fi
APs.
Select a network under
2
Wi-Fi networks.
Enter a password for the network (if necessary).
3
Select
4
Connect.
When prompted, enter the PIN for the Bluetooth
2
wireless feature and select OK (if necessary).
Select
3
Accept to confirm that you are willing to receive
data from the device (if necessary).
Received data is saved to the Bluetooth folder. If you
receive a contact, it is automatically saved to the
phonebook.
Wi-Fi
Learn to use your device’s wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses non-harmonised frequency and
is intended for use in all European countries. The
Wi-Fi network can be operated in the EU without
restriction indoors, but cannot be operated
outdoors in France.
To Next Page
Loading...
