Samsung GX-10 - Printing Single Images

ŝ111Ş
Printing Using PictBridge
4. After printer start-up is complete, turn the camera on.
The PictBridge menu appears.
3. Turn the printer on.
1. Use the four-way controller (Ɗƌ) to select [Print One] on the
PictBridge menu.
2. Press the OK button.
The Print one screen appears.
ƃ PictBridge menu is not displayed if [USB] is set to [Computer].
INFORMATION
Printing Single Images
: Set: Move
Select Printing Mode
Print One
Print All
DPOF Auto Print
: Set: Move
Select Printing Mode
Print One
Print All
DPOF Auto Print