Samsung GX-10 - Selecting Flash Mode

ŝ71Ş
Using the Built-in Flash
1. Press the Fn button.
The Fn menu appears.
2. Press the four-way controller (ƌ).
The flash options screen appears.
3. Use the four-way controller (ȜȞ) to choose a flash mode.
ſ When not in Auto mode, turn the rear e-dial to perform Flash Compensation. The compensation
range is -2.0 to +1.0. (p.75)
4. Press the OK button twice. The camera returns to a capture mode.
Selecting Flash Mode
ƃ Available flash mode, by recording mode (O : Selectable, X : Not selectable)
Auto discharge
Fill-in Flash
Auto flash+Redeye reduct
Fill-in Flash+Red-eye
Slow-speed sync
Slow-speed sync+Red-eye
Trailing curtain sync
APSvTvAv TAv M B X
USER
OXXXXXXXXO
XOOOOOOOOO
OXXXXXXXXO
XOOOOOOOOO
XOOXOXXXXO
XOOXOXXXXO
XOOOOOOOXO
: Move : Exit
FLASH
Fill-In
: Set
* In the USER mode, the available flash may be changed by the exposure mode.