Samsung GX-10 - Using an External Flash (Optional)

ŝ212Ş
Using an External Flash (Optional)
*1 : Shutter speed of 1/90 sec. or slower.
*2 : Can be combined with SEF-36PZF for rear curtain sync flash.
*3 : When combined with the SEF-36PZF, 1/3 of the flash discharge can be output by the built-in flash
and 2/3 can be output by the external flash.
*4 : Two or more SEF-54PZF, SEF-36PZF units are required.
ƈ Using the optional external flash SEF-54PZF, SEF-36PZF enables a variety of flash modes, such as
P-TTL auto flash mode, high-speed flash sync mode, and wireless mode. See the chart below for
details. (O: Available,Ɖ: Restricted, X: Not available)
ƈ See the SEF-54PZF, SEF-36PZF operating manual for details.
ſ When using an external flash, it is recommended to use the high-precision SEF-54PZF, SEF-36PZF,
as it is capable of P-TTL auto flash mode.
Red-eye reduction flash O O
Automatic flash discharge O O
Auto viewfinder check X X
P-TTL auto flash (appropriate sensitivity: 200 to 3200) O O
Slow-speed sync O O
Flash exposure compensation O O
AF illuminator O O
Rear curtain sync flash
*1
Ɖ
*2
O
Contrast-control-sync flash mode Ɖ
*3
O
Slave flash X O
Multi Flash X X
High-speed flash sync X O
Wireless flash
*4
XO
After the flash is charged, the camera automatically switches to
the flash sync speed.
Aperture is automatically set in P (Program) mode and Tv
(Shutter Priority) mode.
O
O
O
O
Camera Function
Flash
Built-in Flash
SEF-36PZF