Alignment & Adjustment
Samsung Electronics 3-3
3-3 Factory Data
★ The underlined are items applied during the service adjustment. None of the others should be adjusted.
1. OPTION
No Item Range Default Remark
1 Factory Reset
2 WB Reset ON/OFF OFF Initialize the White Balance value
3 EER Reset - - Clear the EEPROM
4 User Reset - -
5
DIGITAL→DMD
- -
6 Led Clear - - Initialize lamp usage time. Lamp Life is set to zero
7 Lamp Life h Led on time counter
8 AUTO POWER ON/OFF 2
The sets turns on automatically when the power cord is
pluged
9 MUTE TIME(Video) 0~1000 440 Time which the screen will be black while switching
10 DDC Protection ON/OFF ON DDC write ON/OFF selection
11 LNA Default AUTO/OFF Auto LNA setting OFF/Auto selection
12 PROTECT ON/OFF ON Protection ON/OFF selection
13 WATCH DOG ON/OFF ON Watch Dog ON/OFF selection
14 WD COUNT 0 0 Count for Watch Dog event
15 DBG/RS232 SEL DEBUG/RS232 RS232 Rs232/Debug
16 BUS STOP ON/OFF OFF
17 FACTORY ON/OFF ON
18 SMART DEBUG ON/OFF OFF All user settings are set to default
19 EER COUNT ON/OFF ON/OFF OFF
20 EER COUNT 0x0000
21 LNA+ ON/OFF ON
22 LNA Check Count 10
23
DMD→DIGITAL
- - To trans the CCA data form DMD to DIGITAL
24 Shop Mode ON/OFF OFF
25 Color Gamut(Wide) ON
26 PC Ident AUTO/Enable AUTO
27 HotPlug on/off ON/OFF ON
28 HotPlug Off Hold Time 1500ms
29 HDMI Mute Time 0ms
30
DDP 3D Test 3D ready
Function TEST
To Next Page
Loading...
