Alignment & Adjustment
Samsung Electronics 3-17
3-4 Service Adjustment
3-4-1 Vertical / Horizontal Position Adjustment
1. Turn off the power to put the unit into the STAND-BY mode.
2. In order to enter the Service Mode, Press "Mute" → "1" → "8" → "2" → "POWER" buttons on the Remote Control.
3. Select "Service" on the first display of the Service mode menu.
4. Select the H/V-Position for vertical positioning and horizontal positioning by using the ▲▼(Up & Down) buttons and◀▶
(Left or Right) buttons to adjust the screen position.
※ Do not set the V-position value to 34 or 35. (Setting to these values will cause horizontal lines on the right side of the screen.)
To Next Page
Loading...
