Alignment & Adjustment
3-8 Samsung Electronics
6. SDP62(IPC)
No Item Range Default Remark
1 (NR)M_NR_ON/OFF ON MAIN PICTURE NR ON/OFF
2 (NR)S_NR_ON/OFF ON SUB PICTURE NR ON/OFF
3
(NR)NR_Zeromotion_M 1
8 Gain contral for motion detection
4 (NR)NR_Fullmotion_M 240
5 (NR)M_MAX_WEIGHT 110 MAIN NR FRAME WEIGHT
6 (NR)S_MAX_WEIGHT 110 SUB NR FRAME WEIGHT
7 (NR)GMV_ON OFF Global Motion Vector ON/OFF
8 (NR)TH_FULLMD 64
9 51FLT_ON 3
10 FLT_SP ON
11 FLT_FP OFF
12 FLT_STL 0
13 FLT_MOT 0
14 Spatial_Analog_TH 0 0: Vertical Interpolation(do not use directional information)
15 Ticker_Mode All off Interlace only,Ecxept film,All on
16 Debuger_Mode off film,Stop,Motion,Moving,Judder,Ticker,Weigh
17 (FILM)3:2_Mode 1 3:2 PULL DWON MODE SELECTION
18 (FILM)2:2_Mode 1 2:2 PULL DWON MODE SELECTION
19 (FILM)FLM_32_22 3
20 CLK_OSD_PHASE 5 B1 OSD DATA LATCH PAHSE
21 (M)Test Pattern 0 INPUT TEST PATTERN
22 (S)Test Pattern 0
To Next Page
Loading...
