Alignment & Adjustment
Samsung Electronics 3-11
9. SDP62(PE)
No Item Range Default Remark
1 Test Pattern 0 OUTPUT TEST PATTERN SELECTION
2 SNI_PROC_CEP ON Contrast Enhancement ON/OFF
3 SNI_PROC_DEP ON Detail Enhancement Processing ON/OFF
4 SNI_PROC_CEA ON Contrast Enhancement ON/OFF
5 SNI_PROC_CCS ON Color Compensation Processing ON/OFF
6 SNI_PROC_MCC ON MCC Processing ON/OFF
7 SNI_PROC_CA ON Contrast Adjustment Processing ON/OFF
8 SNI_PROC_CVD ON Color Vision Deficiency Processing ON/OFF
9 SNI_PROC_CVD ON Color Vision Deficiency Processing ON/OFF
10 SNI_BWS Adaptive BWS MODE SELECTION
11 B_RATIO 13000 Low lecel informatino for the minimum value
12 W_RATIO 6000 High lecel informatino for the minimum value
13 BLACK_TILT 110 Black Stretch Area
14 B_GAIN_MAX 380 Black slope gain limit
15 GAIN_X1 22 Gain of horizontal high frequecy region
16 GAIN_X2 25 Gain of horizontal middle frequecy region
17 GAIN_Y1 15 Gain of vertical high frequecy region
18 GAIN_Y2 19 Gain of vertical middle frequecy region
19 SUP_LIFE_SEL ON
20 BOOL_SUPP_SELX1 OFF Horizontal high frequecy Shoot Shppression ON/OFF
21 BOOL_SUPP_SELX2 OFF Horizontal middle frequecy Shoot Shppression ON/OFF
22 BOOL_SUPP_SELY1 ON Vertical high frequecy Shoot Shppression ON/OFF
23 BOOL_SUPP_SELY2 OFF Vertical middle frequecy Shoot Shppression ON/OFF
24 BOOL_ENH_SEL OFF Amplitude scaling block gain Processing ON/OFF
25 LOG_MODE ON Amplitude scaling block log scale ON/OFF
26 R_MR 150
27 CORING_ON ON Post Coring ON/OFF
28 RTH2 6 Noise Detection Block Threshold2
29 NDON OFF Noise Detection ON/OFF
30 WB_RED_C_COEFF 1024
31 WB_GRN_C_COEFF 1024
32 WB_BLU_C_COEFF 1024
33 WB_RED_B_COEFF 1024
34 WB_GRN_B_COEFF 1024
35 WB_BLU_B_COEFF 1024
36 R_Coring_TH1 2 Horizontal high frequecy Coring Threshold
37 R_Coring_TH2 2 Horizontal middle frequecy Coring Threshold
38 R_Coring_TH3 5 Vertical high frequecy Coring Threshold
39 R_Coring_TH4 5 Vertical middle frequecy Coring Threshold
To Next Page
Loading...
