English 17
02 Connections
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
1.
2.
3.
Black
Red
Connect the upper Speaker to the assembled Stand.
Insert another large
screw (5*15, For connecting Speaker
& Stand)
clockwise into the hole on the rear of the
speaker using a
screwdriver.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
3.
4.
5.
5
4
3
Stand
Speaker
In case of HT-D550
Front Speaker (R)
Subwoofer
Surround Speaker (R) Surround Speaker (L)
Front Speaker (L)
Center Speaker
* Refer to page 16 for the HT-D555 speakers.
HT-D550_D555-TK-ENG-1228.indd 17HT-D550_D555-TK-ENG-1228.indd 17 2011-12-29 11:36:482011-12-29 11:36:48