Connect the Wireless Transmitter to the
Charging Cradle.
Connect the DC power adapter to a wall
socket.
The charging indicator lights and charging
starts. After the battery is fully charged, the
charging indicator turns Green.
Operation status of the charging
cradle's LED
Display Function
GREEN LED ON
Power on /Charging
completed
RED LED ON
Charging.
NOTE
The LED indicates the charging state of the
built-in battery in the wireless iPod transmitter.
Check the charging state of iPod/iPhone by
checking the charging indication of its battery.
CAUTION
Wireless Dock Cradle can be linked with
Home Theater when SWA-5000 is used.
The charger can only recharge Samsung
wireless transmitters whose speci cations
are compliant with the charger.
•
✎
!
Select the video le to play.
-
You can use the remote control or the
product to control simple playback functions
such as the PLAY, PAUSE, STOP,
[
/]
and( /)buttons. (See page 16.)
NOTE
You must have the VIDEO output
(Composite) connected to your TV to view
iPod video (See page 24).
If you want to play iPod video via VIDEO
output, set Anynet+ (HDMI-CEC) to off.
No other screen than the playback screen
will appear on the TV. View other iPod
screens on the iPod player.
If the connected iPod does not support
video playback, the "Playing video les is not
supported on this iPod model." message
appears when you select the Video menu.
If you want to return to the iPod menus while
the iPod player is connected using the dock,
press FUNCTION on the remote control or
press
on the front panel of the system
and select R. IPOD. The FUNCTION mode
switches as follows :
BD/DVD ; D. IN ; AUX
; R. IPOD ; W. IPOD ; H. IN1; H. IN2 ; FM
You can enjoy ner quality music through the
speakers by transmitting an iPod/iPhone’s audio
signal using a Wireless Transmitter.
To connect the Cradle to the main unit when you
use the Cradle the rst time, you have to set the
Linking ID manually. (see page 62)
After you set the Linking ID, the Cradle will
connect to the Wireless Transmitter automtically
when you turn it on.
To use the Wireless Dock Cradle:
Turn on the main unit and connect the iPod/
iPhone to the Wireless transmitter.
Then, press the button on the product to
select "W. IPOD" mode.
The FUNCTION mode of the main unit switches
as follows :
BD/DVD ; D. IN ; AUX ; R. IPOD ;
W. IPOD ; H. IN1 ; H. IN2 ; FM
(See page 14)
✎
To Next Page
Loading...
