What to do if the remote control of my Samsung HT-E4200 Home Theater System doesn't work?
Ensure you are operating the remote within its operational range and at the proper angle relative to the sensor. Check if the batteries are drained and make sure you have correctly selected the mode (TV/BD) functions of the remote control (TV or BD).
Why is there no sound produced on my Samsung HT-E4200?
The home cinema does not play sound during fast playback, slow playback, and step motion playback. Check if the speakers are connected properly and the speaker setup is correctly customized. Also, verify that the disc is not severely damaged.
Why does my Samsung Home Theater System have no HDMI output?
Check the connection between the TV and the HDMI jack of the product. Also, verify if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
What to do if playback does not start immediately on my Samsung HT-E4200?
If playback doesn't start immediately when you press the Play/Pause button, check if you are using a deformed disc or a disc with scratches on the surface. If so, wipe the disc clean.
How to reset the rating level password on my Samsung HT-E4200 Home Theater System?
With no disc in the product, press and hold the product's 5 button for longer than 5 seconds. INIT appears on the display and all settings will return to the default values. Then, press the POWER button. Be aware that using the RESET function will erase all stored settings, so only use this if necessary.
Why does playback not start on my Samsung HT-E4200 Home Theater System?
Check the region number of the Blu-ray/DVD disc, as discs purchased from abroad may not be playable. Note that CD-ROMs and DVD-ROMs cannot be played on this product. Also, make sure that the rating level is correct.
Why does my Samsung HT-E4200 have no sound while listening to TV audio?
If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.
What to do if the disc is rotating but no picture is produced on my Samsung HT-E4200?
Make sure the TV power is on and the video cables are connected properly. Check if the disc is dirty or damaged. A poorly manufactured disc may also not be playable.
Why does my Samsung HT-E4200 Home Theater System have an abnormal HDMI output screen?
If random noise appears on the screen, it means that the TV does not support HDCP (High-bandwidth Digital Content Protection).
Why does "Not Available" appear on the screen of my Samsung Home Theater System?
The features or action cannot be completed because: 1. The Blu-ray/DVD disc's software restricts it. 2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles). 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number or search time that is out of range.
Instructions for wiring the main power supply plug, including safety precautions and wire color coding.
Precautions for handling the apparatus, including electrical safety and general care.
Important health and safety information and precautions for using the 3D viewing function.
Details on disc types and file formats supported for playback by the product.
Identification and explanation of controls and indicators on the front panel of the product.
Identification and explanation of ports and connectors on the rear panel of the product.
Detailed explanation of the buttons and functions on the remote control.
Guide on how to program the remote control to operate a TV.
Instructions on how to connect the speakers to the product and optimal placement.
Describes four different types of speaker installation methods for the HT-ES4200 model.
Instructions on how to assemble the front speaker, either on a partition or a table stand.
Detailed steps for connecting the speaker wires to the front speakers and the main unit.
Explains two methods (HDMI and Video Cable) for connecting the product to a TV.
Instructions for connecting the product to a network router via wired or wireless connections.
Step-by-step guide for configuring initial product settings like language and network.
Settings for parental controls, PIN management, and factory reset.
Overview of network services like Smart Hub and BD-LIVE, and network connection setup.
Guide on how to update the product's software for performance improvements.
Detailed guide on controlling video playback using remote control buttons.
Guide on controlling music playback, including fast play, track selection, and repeat modes.
How to connect to and use the BD-LIVE service for enhanced disc content.
Steps to resolve product non-responsiveness, including factory reset.
General| Disc loading type | Tray |
|---|---|
| Disc types supported | BD, BD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Playback disc formats | Blu-Ray audio, Blu-Ray video, CD audio, CD video, VCD |
| Number of optical discs | 1 discs |
| Optical disc player type | Blu-Ray recorder |
| Built-in HDD | No |
| MP3 playback | Yes |
| Compatibility | Apple iPod Apple iPhone |
| Package weight | 9.5 kg |
| Volume control | Digital |
| Subwoofer depth | 285 mm |
| Subwoofer width | 168 mm |
| Subwoofer height | 350 mm |
| Image formats supported | JPG |
| Apple docking compatibility | Not supported |
| Aspect ratio | 4:3, 16:9 |
| Video formats supported | 3GP, ASF, AVCHD, AVI, DIVX, H.264, MKV, MP4, MPEG, MPEG1, MPEG2, MPEG4, MPG, TP, TRP, TS, VOB, WMV, WMV9, XVID |
| Analog signal format system | PAL |
| WMA bit rates | 5 - 384 Kbit/s |
| Audio decoders | Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-HD |
| RMS rated power | 500 W |
| Audio output channels | 2.1 channels |
| Audio formats supported | AAC, AC3, LPCM, MP3, WMA |
| Supported radio bands | FM |
| Front speaker type | 1-way |
| Front speaker impedance | 3 Ω |
| Front speakers RMS power | 330 W |
| Front speaker frequency range | 140 - 20000 Hz |
| Soundbar speaker RMS power | 170 W |
| Subwoofer type | Passive subwoofer |
| Subwoofer frequency range | 40 - 160 Hz |
| Product color | Black |
| Playback modes | Folder, Playlist, Slideshow, Zoom |
| Supported file systems | FAT16, FAT32, NTFS |
| Consumer Electronics Control (CEC) | Anynet+ |
| Cables included | AC, Composite |
| HDMI in | 0 |
| USB version | 2.0 |
| Number of HDMI outputs | 1 |
| Power consumption (standby) | 0.45 W |
| Power consumption (typical) | 92.2 W |
Weight and Dimensions| Main unit weight | 2500 g |
|---|---|
| Subwoofer weight | 2600 g |
| Main unit dimensions (WxDxH) | 430 x 250 x 55 mm |
| Subwoofer dimensions (WxDxH) | 168 x 285 x 350 mm |
| Front speaker dimensions (WxDxH) | 90 x 70 x 139 mm |
To Next Page
