To Next PageTo Next PageHow to fix Samsung HT-F6530 when it can't receive radio broadcasts?
If your Samsung Home Theater System can't receive radio broadcasts: First, ensure the antenna is connected properly. If the antenna's input signal is weak, install an external FM antenna in an area with good reception.
The menu screen does not appear even when the menu function is selected on my Samsung Home Theater System, what should I do?
You may be using a disc that does not contain menus.
Why won't my Samsung HT-F6530 Home Theater System start playback?
If playback won't start on your Samsung Home Theater System, there might be a few reasons. A Blu-ray/DVD disc purchased from abroad may not be playable, so check the region number of the disc. Also, CD-ROMs and DVD-ROMs cannot be played on this product. Finally, make sure that the rating level is correct.
Why aren't audio language and subtitles working on my Samsung HT-F6530 Home Theater System?
Audio language and subtitles will not work on your Samsung Home Theater System if the disc does not contain them.
Why does my Samsung Home Theater System delay playback after pressing play?
If playback doesn't start immediately when you press the Play/Pause button on your Samsung Home Theater System, it could be due to a deformed disc or a disc with scratches on the surface. Try wiping the disc clean.
Why is the disc rotating on my Samsung Home Theater System but there is no picture?
If the disc is rotating in your Samsung Home Theater System but no picture is produced, check if the TV is powered on and ensure the video cables are connected properly. Also, inspect the disc for dirt or damage and try cleaning it. Keep in mind that a poorly manufactured disc may not be playable.
Why is there no sound while listening to TV audio through my Samsung Home Theater System?
If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.
Why can I hear sound only from a few speakers and not all 6 on my Samsung HT-F6530 Home Theater System?
On certain Blu-ray/DVD discs, sound is output from the front speakers only. Check if the speakers are connected properly and adjust the volume. When listening to a CD, radio, or TV, sound is typically output to the front speakers only.
Why is Dolby Digital 5.1 CH Surround Sound not produced on my Samsung Home Theater System?
Dolby Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound. Check if there is a "Dolby Digital 5.1 CH" mark on the disc. Also, verify that the audio language is correctly set to Dolby Digital 5.1-CH in the information display.
How to reset forgotten rating level password on Samsung Home Theater System?
With no disc in the product, press and hold the product's 5 button for longer than 5 seconds. 'INIT' will appear on the display, and all settings will return to the default values. Then, press the POWER button. Note that using the RESET function will erase all stored settings, so use this only when necessary.
General| Type | Home Theater System |
|---|---|
| Audio Channels | 5.1 |
| Total Power Output | 1000W |
| Blu-ray Playback | Yes |
| 3D Playback | Yes |
| HDMI Inputs | 2 |
| USB Playback | Yes |
| Wi-Fi | Yes |
| DLNA Certified | Yes |
| Smart Hub | Yes |
| DVD Player | Yes |
| HDMI Output | 1 |
| Bluetooth | Yes |
| Smart TV Connectivity | Yes |
| Connectivity | HDMI, USB, Wi-Fi, Bluetooth |
