To Next PageTo Next PageWhat to do if my Samsung HT-F6530W Home Theater System disc is rotating but no picture is produced?
Verify that the TV is powered on and the video cables are connected correctly. Also, check if the disc is dirty or damaged. A poorly manufactured disc may also be the cause.
Why is Dolby Digital 5.1 CH Surround Sound not working on my Samsung HT-F6530W?
If you are not receiving Dolby Digital 5.1 CH Surround Sound on your Samsung Home Theater System, ensure that the disc is recorded with 5.1 channel sound by checking for the 'Dolby Digital 5.1 CH' mark on the disc. Also, verify that the audio language is correctly set to Dolby Digital 5.1-CH in the information display.
What to do if my Samsung HT-F6530W is not working?
If your Samsung Home Theater System is not working correctly (for example: the power goes out or a strange noise is heard), press and hold the remote control's 5 button for 5 seconds in STANDBY mode. Keep in mind that using the RESET function will erase all stored settings, so only use this if absolutely necessary.
How to reset the rating level password on a Samsung HT-F6530W?
If you've forgotten the rating level password for your Samsung Home Theater System, remove any disc from the product, then press and hold the 5 button on the product for longer than 5 seconds. 'INIT' will appear on the display, and all settings will return to the default values. Then, press the POWER button. Be aware that using the RESET function will erase all stored settings, so only use this if necessary.
What to do if the Samsung Home Theater System remote control does not work?
Ensure you are operating the remote within its operational range and at the proper angle relative to the sensor. Also, check if the batteries are drained or if you have correctly selected the mode (TV/BD) functions of the remote control (TV or BD).
Why is there no sound when listening to TV audio through my Samsung HT-F6530W Home Theater System?
If you're not hearing sound while listening to TV audio through your Samsung Home Theater System, and the OPEN/CLOSE ^ button is pressed while listening to TV audio using the D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.
What to do if my Samsung Home Theater System is not working normally?
If your Samsung Home Theater System isn't working normally, press and hold the remote control's 5 button for 5 seconds in STANDBY mode. Be aware that using the RESET function will erase all stored settings, so only use this if necessary.
How to fix Samsung Home Theater System when it can't receive radio broadcasts?
If your Samsung Home Theater System can't receive radio broadcasts: First, ensure the antenna is connected properly. If the antenna's input signal is weak, install an external FM antenna in an area with good reception.
Why is sound coming from only some speakers on my Samsung HT-F6530W Home Theater System?
If sound is only coming from a few speakers on your Samsung Home Theater System, consider these points: On certain Blu-ray/DVD discs, sound is output from the front speakers only. Also, check that all speakers are connected properly. Adjust the volume and remember that when listening to a CD, radio, or TV, sound is output to the front speakers only.
Why won't my Samsung Home Theater System start playback?
If playback won't start on your Samsung Home Theater System, there might be a few reasons. A Blu-ray/DVD disc purchased from abroad may not be playable, so check the region number of the disc. Also, CD-ROMs and DVD-ROMs cannot be played on this product. Finally, make sure that the rating level is correct.
General| Brand | Samsung |
|---|---|
| Model | HT-F6530W |
| Category | Home Theater System |
| Language | English |
