To Next PageTo Next PageHow to fix Samsung HW-H7500 Speakers when no sound is produced?
If your Samsung Speakers aren't producing sound, ensure that the Mute function is off by pressing the (Mute) button. Also, check the volume level and adjust it if it's set to the minimum.
Why is TV SoundConnect (TV pairing) failing on my Samsung HW-H7500?
If the TV SoundConnect (TV pairing) failed on your Samsung Speakers, ensure your TV supports TV SoundConnect, which is available on some Samsung TVs released from 2012. Update your TV's firmware to the latest version. If an error occurs during connection, press and hold the p button for 5 seconds to reset the TV SoundConnect connection.
What to do if the Samsung Speaker System remote control does not work?
If the remote control for your Samsung Speaker System isn't working, the batteries might be drained, or you may be too far from the main unit. Try replacing the batteries with new ones and move closer to the unit.
Why is there no sound coming from my Samsung Speaker System?
If no sound is coming from your Samsung Speaker System, check if the Mute function is on or if the volume is set to the minimum. Press the (Mute) button to cancel the function and adjust the volume.
Why did TV SoundConnect (TV pairing) fail on my Samsung Speaker System?
TV SoundConnect may fail on your Samsung Speaker System for several reasons: * Your TV might not support TV SoundConnect (only some Samsung TVs released from 2012 on support it). * Your TV firmware might not be the latest version. * An error occurred during the connection. Check that your TV supports TV SoundConnect, update your TV with the latest firmware, or press and hold the & button for 5 seconds to reset the TV SoundConnect connection.
What to do if a function doesn't work when pressing a button on my Samsung Speaker System?
If a function on your Samsung Speaker System doesn't work when you press the button, it could be due to static electricity in the air. Disconnect the power plug and then connect it again.
What to do if my Samsung HW-H7500 Speakers remote control does not work?
If the remote control for your Samsung Speakers isn't working, first, try replacing the batteries with new ones. If that doesn't solve the issue, make sure you're not too far from the main unit and move closer.
What to do if the red LED is blinking on my Samsung HW-H7500 subwoofer?
If the red LED on your Samsung Speakers subwoofer is blinking and no sound is coming out, it might not be properly connected to the main unit. Try to connect your subwoofer again, refer to Page 14 for instructions.
How to stop my Samsung HW-H7500 subwoofer from droning and vibrating?
If your Samsung Speakers subwoofer drones and vibrates noticeably, adjust its value by pressing the EQUALIZER WOOFER button on your remote control. You can set the value between SW-6 and SW+6.
What to do if a function doesn't work on my Samsung Speakers?
If a function on your Samsung Speakers isn't working when you press the button, the issue might be static electricity in the air. Try disconnecting the power plug and then reconnecting it.
General| Audio decoders | Dolby Digital 5.1, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1) |
|---|---|
| RMS rated power | 320 W |
| Audio output channels | 8.1 channels |
| Audio Return Channel (ARC) | Yes |
| Soundbar speaker RMS power | 160 W |
| Subwoofer connectivity | Wireless |
| Cables included | Audio (3.5mm) |
| Receiver included | - |
| FM radio | No |
| Product color | Black |
| Audio formats supported | AAC, FLAC, MP3, OGG, WAV, WMA |
| Consumer Electronics Control (CEC) | Anynet+ |
| Apple docking compatibility | Not supported |
| Soundbar dimensions (WxDxH) | 1230 x 170 x 42 mm |
| Subwoofer dimensions (WxDxH) | 291 x 291 x 371 mm |
| Subwoofer driver diameter (imperial) | 6.5 \ |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio coaxial in | 0 |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 45 W |
| Package depth | 346 mm |
| Package width | 1290 mm |
| Package height | 455 mm |
| Package weight | 19000 g |
Weight and Dimensions| Soundbar weight | 4000 g |
|---|---|
| Subwoofer weight | 8450 g |
Listen to TV audio via Bluetooth for wireless sound and control.
Reduce risk of electric shock, do not remove cover, no user-serviceable parts.
Ensure proper power supply, ventilation, and avoid moisture, heat, and liquids.
Warning about ingesting batteries and chemical burn hazard from remote battery.
Explanation of buttons on the remote control and their functions.
Instructions for wall-mounting the soundbar with a compatible Samsung TV.
Instructions for placing the soundbar on a flat surface in front of the TV.
Procedure to link the main unit and wireless subwoofer, including ID setting.
Connect Bluetooth devices to play music wirelessly.
Connect and enjoy TV sound through the Soundbar wirelessly.
Play music files from USB storage devices.
Troubleshooting steps if the unit fails to power on.
Troubleshooting steps if no sound is output from the unit.
Troubleshooting steps for issues with TV SoundConnect pairing.
Troubleshooting steps for subwoofer connection or sound issues.
