Samsung HW-J6501R - Wall Mount Installation Precautions

CONNECTING TO AN EXTERNAL DEVICE
You can enjoy sound from separate external devices such as a BD player / game console /set-top box, etc. by
connecting them to your Sound bar.
Optical Cable
External Device
Bottom of Sound bar
1. Connect an Optical Cable as in the picture above.
2. Press the ~ button on top of your Soundbar or the SOURCE button on your remote control to select
D.IN mode.
3. The Soundbar shows D.IN on its display and output sound.
INSTALLING THE WALL MOUNT
Installation Precautions
• Install on a vertical wall only.
• For the installation, avoid a location with high temperature or humidity , or a wa ll that cannot sustain the weight
of the set.
• Check the strength of the wall. If the wall is not strong enough to support the un i t, reinforce the wall or install
the unit on a different wall that can support the unit's weight.
• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board ,
iron board , wood, etc.). If possible, fix the support screws into wall studs.
• Purchase wall mounting screws according to the type and thickness of the wall you will mount the Sound bar
on.
- Diameter : M5
- Length: 1 3/8 inches or longer recommended.
• Connect cables from the unit to external devices before you install it on the wall.
• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
· 13 · English