To Next PageTo Next PageWhy is there no sound coming from my Samsung Speakers?
If no sound is coming from your Samsung Speakers, ensure that the Mute function is off by pressing the (Mute) button. Also, check the volume level and adjust it if it's set to the minimum.
What to do if my Samsung HW-J8501 won't turn on?
If your Samsung Speakers won't turn on, make sure the power plug is properly connected to the outlet.
What to do if my Samsung HW-J8501 Speakers subwoofer drones?
If your Samsung Speakers subwoofer drones and vibrates noticeably, adjust the vibration by pressing the WOOFER button on your remote control to change its value (between -12, -6 to +6).
What to do if a function does not work when the button is pressed on Samsung HW-J8501?
If a function doesn't work when a button is pressed on your Samsung Speakers, it might be due to static electricity. Disconnect the power plug and then reconnect it.
What to do if my Samsung Speakers remote control is not working?
If your Samsung Speakers remote control isn't working, try replacing the batteries with new ones. Also, make sure you're not too far from the main unit; move closer and try again.
How to fix Samsung HW-J8501 Speakers TV SoundConnect pairing failed?
If TV SoundConnect pairing failed on your Samsung Speakers, first ensure your TV supports TV SoundConnect (available on some Samsung TVs released from 2012). Update your TV's firmware. You can also reset the TV SoundConnect connection by pressing and holding the & button for 5 seconds.
General| Audio decoders | DTS, Dolby Digital 5.1 |
|---|---|
| RMS rated power | 350 W |
| Audio output channels | 9.1 channels |
| Audio Return Channel (ARC) | Yes |
| Subwoofer type | Active subwoofer |
| Subwoofer connectivity | Wireless |
| Receiver included | No |
| Product color | Silver |
| Wall mountable | - |
| Audio formats supported | AAC, FLAC, MP3, OGG, WAV, WMA |
| Consumer Electronics Control (CEC) | Anynet+ |
| Apple docking compatibility | Not supported |
| Subwoofer driver diameter (imperial) | 8 \ |
| HDMI in | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Connectivity technology | Wired & Wireless |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 43 W |
| Package depth | 386 mm |
| Package width | 1510 mm |
| Package height | 341 mm |
| Package weight | 21500 g |
Weight and Dimensions| Depth | 185 mm |
|---|---|
| Width | 1450 mm |
| Height | 60 mm |
| Soundbar weight | 5000 g |
| Subwoofer depth | 181 mm |
| Subwoofer width | 500 mm |
| Subwoofer height | 332 mm |
| Subwoofer weight | 10600 g |
Details the key features of the Curved Soundbar, including immersive sound, music streaming, and connectivity options.
Explains the powerful sound experience and immersive listening provided by the 9.1Ch surround sound.
Details how to access favorite music easily via Wi-Fi and the Samsung Multiroom App.
Connects TV and Soundbar via Bluetooth for a clean, wireless setup and single remote control.
Enables easy music sharing across multiple audio devices using the Multiroom Link app.
Allows connecting external USB storage devices to play music files.
Enables connecting a Bluetooth device for high-quality stereo sound wirelessly.
Explains HDMI's ability to transmit video/audio and the ARC function for TV sound.
Lists Dolby and DTS trademarks and patents information.
Provides warnings to reduce the risk of electric shock and personal injury from the product.
Highlights precautions regarding electric shock, moisture, and ensuring plug accessibility.
Disconnecting AC plug during thunderstorms and ensuring proper grounding connection.
Avoid direct sunlight, heat sources, moisture, and strong magnetic or electric fields for proper operation.
Warns about hazardous battery disposal, handling, and the risk of chemical burns if swallowed.
Explains the meaning of icons like Caution and Note used within the manual.
Lists and illustrates accessories included with the main unit of the soundbar.
Lists and illustrates accessories included with the subwoofer.
Details the buttons and display functions on the soundbar's top and front panel.
Provides instructions for cleaning the apparatus and notes on power-on delay and TV speaker settings.
Illustrates and describes the ports and buttons on the rear and bottom of the soundbar.
Explains the function of various ports like Wi-Fi SETUP, USB, HDMI, LAN, and AUX IN.
Advises on safe disconnection of power cords and connecting components before powering.
Details the functions of each button on the soundbar's remote control.
Explains SOURCE, Mute, Repeat, Skip Forward, SOUND CONTROL, and Anynet+ functions.
Describes the Anynet+ function for TV control and Auto Power Link for optical sources.
Explains Power, Volume, Play/Pause, Skip Back, Sound Effect modes, and Streaming Music.
Details TREBLE, BASS, AUDIO SYNC, and frequency band adjustments via Sound Control.
Explains how to adjust woofer volume and activate the SPK ADD function.
Provides step-by-step instructions for inserting the battery into the remote control.
Provides an overview of the process for installing the soundbar.
Details the procedure for wall-mounting both the soundbar and TV using a wall mount.
Lists the screws and mounts required for wall mounting the soundbar and TV.
Describes fastening screws and guides for attaching the TV-Mount to the TV.
Details fastening the TV-Mount to the TV and then mounting the TV on the wall.
Explains pushing the soundbar onto the TV-Mount and securing it with the Holder-Fix Mount.
Provides instructions for installing the soundbar onto a TV stand.
Details steps for attaching feet and supports to the soundbar for TV stand installation.
Describes aligning and pushing the soundbar onto the TV stand base.
Warns against placing heavy objects or stepping on the main unit during installation.
Provides instructions for placing the soundbar independently on a surface.
Details removing feet/supports and placing the soundbar anywhere.
Explains how to attach the clamp-wire to the unit and run cables neatly.
Provides steps for attaching the cover-foot, screws, and rubber feet to the subwoofer.
Details how to connect the main unit and subwoofer wirelessly.
Explains that the main unit and subwoofer should link automatically when powered on.
Provides steps for manually setting the linking ID if automatic connection fails.
Advises on safe connection procedures and turning off power before moving.
Discusses interference from other devices, transmission distance, and obstructions for wireless connection.
Instructs to reset the connection if the main unit does not establish a wireless link.
Recommends keeping the subwoofer away from water, moisture, and obstructions for best results.
Provides instructions for connecting the soundbar to a TV.
Details how to connect the soundbar to a TV using an HDMI cable for audio and video.
Explains HDMI interface, ARC port, cable recommendations, Anynet+, and ARC support.
Explains how to connect the soundbar to a TV using an optical cable for audio.
Enables the soundbar to turn on automatically when the TV is turned on via optical cable.
Details how to connect the soundbar to a Samsung TV for TV sound output via Bluetooth.
Provides step-by-step instructions for enabling and connecting TV SoundConnect via TV menu.
Specifies TV compatibility for SoundConnect, operational ranges, and control limitations.
Provides instructions for connecting external devices to the soundbar.
Explains how to connect digital devices using an HDMI cable.
Details connecting external devices using optical or AUX analog cables.
Details connecting to source devices via AUX IN.
Details connecting to source devices via OPTICAL IN.
Explains how to connect USB devices to play music files.
Provides information on file naming, compatibility, file systems, and direct connection for USB devices.
Lists supported file extensions, codecs, sampling rates, and bit rates for USB playback.
Advises against removing USB during transfer, playing DRM files, and using external HDDs/phones.
Explains how to select different input sources like D.IN, AUX, HDMI, BT, TV, USB.
Shows the display names for each input mode (D.IN, AUX, HDMI, BT, TV, USB).
Describes situations where the unit turns off automatically due to no audio or key input.
Explains how to toggle Auto Power Down for AUX mode and disconnection scenarios.
Provides an overview of connecting to Bluetooth devices for wireless music playback.
Details the step-by-step process for pairing the soundbar with a Bluetooth device.
Guides through selecting BT mode, finding the device, and playing music.
Covers PIN code, single device pairing, connection termination, and potential interference.
Specifies supported Bluetooth features like SBC data, A2DP, and HF limitations.
Explains how to disconnect a paired Bluetooth device from the soundbar.
Describes how to switch modes or turn off the soundbar to end a Bluetooth connection.
Discusses Bluetooth technology, causes of noise/malfunction, and optimal connection conditions.
Explains how the Network Standby On function automatically turns on the soundbar via Bluetooth or Wi-Fi.
Details how to connect a smart device and activate Network Standby On using the remote.
Guides on connecting multiple Samsung Multiroom devices wirelessly using the Multiroom App.
Outlines requirements for Multiroom Link: Wireless Router and Smart Device connected to the internet.
Instructs to download and install the Samsung Multiroom App from Google Play or App Store.
Explains how to launch the Multiroom app on a smart device.
Provides instructions for connecting the soundbar to your network via the Samsung Multiroom app.
Directs users to the web manual for further details on network connection.
Explains how to update the soundbar's system firmware using a USB device.
Provides step-by-step instructions for updating firmware via USB.
Details connecting the USB, disconnecting power, and initiating the update process.
Offers troubleshooting steps if the UPDATE message does not appear on the display.
Warns about factory reset after update, subwoofer connection reset, and formatting USB devices.
Explains the automatic software update feature when the soundbar is connected to the internet.
States that Auto Update is enabled by default and requires an internet connection.
Troubleshooting steps for when the unit fails to power on, checking power cord connection.
Troubleshooting static electricity issues affecting button functions.
Troubleshooting steps for no sound output, checking mute and volume settings.
Troubleshooting steps for remote control issues, checking batteries and distance.
Troubleshooting steps for failed TV SoundConnect pairing, checking TV support and firmware.
Troubleshooting steps for when the subwoofer's red LED blinks and no sound is produced.
Troubleshooting tips for excessive subwoofer vibration or droning sounds.
Lists detailed technical specifications for the main unit and subwoofer.
Provides the model name (HW-J8501) and USB port specifications (5V/0.5A).
Details weight, dimensions, operating temperature, and humidity range for the unit.
Lists output power, S/N ratio, and separation details for the amplifier.
Provides contact information for inquiries regarding open source licenses.
References third-party licenses and information for Spotify Software and Connect.
